Steel pipe and spools
Large pipe rolled from plate and welded in our factory. Smaller sizes made from bought-in pipe. Flanged spools to measured lengths.
DN40–DN600
Products
Made in our factory. Priced on request.
Since 1981, Kinetics has turned flat steel plate into finished pipework. We roll and weld pipe up to DN600, and every flange is faced, drilled and welded in our factory.
Made in our factory
The range.
Every item below is made by us. Rubber gaskets and rings for our fittings are made in-house too.
Flanges
PN16 flanges, blank flanges and puddle flanges. Faced, drilled and welded in our factory.
PN16BlankPuddle
Bends
Fabricated mitred bends with visible seams, flanged or plain-ended.
90°45°22.5°11.25°
Tees
Equal, reducing and flanged tees, to your branch sizes.
DN40–DN600
Reducers
Taper and flanged taper reducers.
To your sizes
VJ couplings and adaptors
VJ couplings and VJ adaptors for joining plain-ended pipe.
2″–12″
Flange adaptors and couplings
Flange adaptors, mechanical couplings and stepped couplings for pipes of different outside diameters.
To your pipe OD
Dismantling joints
The closure piece that takes up site tolerance and lets pumps and valves come out for service.
To your flanges
Saddle clamps
Plain, or with a tapping socket for branch connections.
1″–14″ pipe½″–6″ tapping
Bell mouths
Flanged intakes for tanks, sumps and reservoirs.
To your drawing
Puddle flanges
Cast into tank and chamber walls so the pipe passes through watertight.
To your wall
Specials and assemblies
Pump-room headers, riser and hydrant sections, booster manifolds and frames, made to your drawing.
To your drawing
Finishes
Coated in-house.
Every piece leaves finished and protected.
- Epoxy coatingIn-house. Red primer, then blue for water or red for fire
- GalvanisingOn request, through a partner
- GasketsMade in-house for our fittings
- Pressure testingEach piece tested and tagged before it leaves
Supplied to match
Valves and meters, if you need them.
We don't make valves or meters. We supply them from established makers, drilled to suit our flanges, so your pipework arrives complete from one supplier.
Gate valve
Isolation on mains, pump lines and risers.
Butterfly valve
Compact, gear-operated isolation for large bore.
Non-return valve
Swing check valves that stop backflow at pump outlets.
Air valve
Single and double orifice, to let air out of mains.
Pressure-reducing valve
Holds downstream pressure steady for estates and buildings.
Foot valve
Strainer and check valve for pump suction lines.
Bulk water meter
Flanged, 80 mm and 150 mm.
Send us your list or drawing, and we'll price it.
Sizes and quantities are enough. A photo of the old part works too.
WhatsApp / call 0718 274 742 · [email protected]