Large spools and mains
Rolled and welded in our factory up to DN600, flanged and cut to measured lengths.
Up to DN600
Factories, warehouses, estates and treatment works
Reservoir to pump house to the last building. In steel, to DN600.
Since 1981, Kinetics has made steel water pipework for utilities, and for contractors building factories, warehouses and estates. Send us the drawings and we make the mains, the pump-house pipework and every fitting in between.
What we make for you
The heavy steel in your water system.
Puddle flanges
Where the pipe passes through a tank wall, a puddle flange lets it be cast straight into the concrete.
To your wall
Dismantling joints
Let every pump and valve come out for service without cutting the line.
To your flanges
Bell mouths
Flanged intakes for tanks, sumps and reservoirs.
To your drawing
Bends, tees and reducers
Mitred bends, equal and reducing tees, taper reducers. Our own, priced at cost.
DN40–DN600
Pump-house headers and specials
Headers and specials made to your drawing.
To your drawing
How it works
Measured, made, delivered labelled.
Measure as built
Our fitter measures the pump house and mains routes on site.
Made to the real site, not just the drawing.
Roll and weld in our factory
Large pipe rolled from plate and welded under controlled conditions.
Pipe up to DN600 from one factory.
Test, tag and coat
Each piece pressure-tested, tagged and epoxy coated.
Finished and protected before it leaves.
Deliver as a kit
Labelled pieces, gaskets, bolts and a layout drawing, plus valves and bulk meters if you need them.
Everything arrives together, from one supplier.
Valves and bulk meters to match. If you need them, we supply flanged gate, butterfly, non-return, air and pressure-reducing valves, and 80 mm and 150 mm bulk meters, to fit our pipework.
Send us your drawings or bill of quantities, and we'll quote it.
Reservoir and pump-house layouts, mains routes or a BOQ from your consultant.
WhatsApp / call 0718 274 742 · [email protected]